Used plants

We are selling a HTW 1500 two-chamber washer as a demonstration machine from 2025.
Machine has only been run for demonstration purposes and has the following equipment:
460 liter wash tank with 4 bar pump
Rinsing tank 440 liters with 2 bar pump
Compressed air blow-off
Hot air drying
Insulation wash and rinse tank
Solenoid valves for water filling (wash and rinse tank)
Electrical conductivity measurement for dosing the detergent, detergent is always kept at the set percentage ratio
Optional (canister empty signal via PLC)
Side tank lid for easy maintenance, with locking of the lid
Connections for oil separator and filter system available
Siemens SPS control system
Traffic light system
Machine, pumps and control cabinet made entirely of stainless steel
Basket diameter 1500 mm
Basket payload: 350 KG
Usable height under the nozzles: 750 mm
Nozzle pipes are all mechanically height-adjustable
Inching switch for basket rotation (two-handed operation)
Mechanical basket drive via gearbox (no water jet)
Vapor extraction for water vapors
Pneumatic lid opening 80° via two-hand operation

82.990,00 € The price includes 19% VAT

The price includes 19% VAT 

We are selling a Laborex two-chamber parts washer as good as new, ideal for maintenance operations, but can also be used for all other washing tasks.
Type: Loborex R-12-RVS-W/E-2T
Two-chamber system with washing and rinsing function with blower drying (cold air), a heating cartridge could be retrofitted
Transport trolley for easy loading and unloading
Pneumatic lid opening via push-button
Pneumatic switchover from washing to rinsing
Siemens KTP 400 control system, see picture
2 x2 filter pots for dirt collection integrated in the return flow (wash tank and rinse tank)
Machine installation dimensions: 2300 x 2420 x 2500 mm (width x depth x height)
Basket diameter 1180 mm
Usable height inside: 500 mm
Load capacity wash basket: 350 KG
Wash tank capacity: 560 liters
Rinsing tank capacity: 130 liters
Voltage: 400 Volt
Maximum power consumption: 23 KW 38 A
Compressed air maximum 10 bar, minimum 6 bar to control lid and slider (change from washing to rinsing)
Water connection 1/2” maximum pressure 6 bar
Outlet 2 x 2” (wash tank / rinse tank)
Wash pump pressure 5 bar
Rinsing pump pressure 2 bar
Year of construction 2023, only been in operation as a demonstrator, therefore completely as good as new
2 large maintenance flaps for wash and rinse tank
Steam vapor extraction
Detergent dosing can be retrofitted on request
System can be delivered and commissioned on request
Complete operating instructions, circuit diagram and spare parts list available

Price: € 59.990,00 € The price includes 19% VAT

The LCT brush washing table bio.x A 25 is a mobile table-top device for departments with little space.

The smallest and most mobile brush washing table for biological and solvent-free parts cleaning. Thanks to its compact dimensions and low weight, it is used for a wide range of cleaning tasks in maintenance, production and workshops at different locations. The parts washing device is exceptionally economical and offers all the important basic functions for manual brush cleaning.

The special features:

mobile brush washing table for workshops and departments with little space ideal for cleaning small parts, tools, gears, etc.

meets the highest demands on the mobility of the device including filter mat

biological and solvent-free parts cleaning

heated to 41° C – thus maximum cleaning performance of the aqueous cleaner

the cleaning fluid adapted for this cleaning table biologically breaks

down the oils and fats introduced using natural microorganisms and thus maintains optimal cleaning performance

particularly energy efficient

total load capacity (kg): 50,

material: plastic

nominal voltage (V): 230,

operating temperature (°C): 41

height of work surface (mm): 300,

depth of work surface (mm): 410

height outside (mm): 430,

width outside (mm): 670

length outside (mm): 560,

width of work surface (mm): 370,

volume (l): 25

if you have any further questions, please write or call

Price: €1,309.00 The price includes 19% VAT 

LCT NW 180 BSS ultrasonic demonstration tank

Dual frequency 27/80 kHz

Infinitely variable ultrasonic control from 100-10% power

Tank interior dimensions: 800 x 500 x 600 mm (L x W x H)

Washing basket interior dimensions: 700 x 400 x 450 mm (L x W x H)

Ventilated stainless steel control cabinet

Hinged lid

Tank completely insulated

Stainless steel washing basket with four crane eyes and a basket rod for lifting

Four adjustable feet for uneven floors

Floor emptying via ball valve with slanted tank floor for complete emptying

Floor grate / parts cleaning also possible without basket (engine and gear parts etc..)

Floor and 2 x side sound with a total output of 3000 watts

Timer with timer and program control

Connected load 10.2 KW

Delivery and commissioning by arrangement and Cost coverage possible

If you have any further questions, please write or call

Price: €36,500.00 The price includes 19% VAT 

Standard: Without insulation as standard

Machine made entirely of stainless steel including washing pump

– Automatic basket drive

– Touch button for rotating the basket outside of the cleaning procedure

– Tank cover and sieve filter under the basket made of stainless steel

– Dry run protection

– Door safety switch

– Connections for plate phase separators (oil separators)

– Inner basket width 975 mm

– Usable height of basket to lower edge of nozzle block 450 mm

– Flat jet nozzles

– Washing pressure 3 bar

– including 20 KG LCT Power Star 50-730

24 month guarantee

Price: €15,719.00 The price includes 19% VAT

Standard: Without insulation as standard

Demonstration machine from 2024 made entirely of stainless steel including washing pump

– Automatic basket drive

– Touch button for turning the basket outside of the cleaning procedure

– Tank cover and sieve filter under the basket made of stainless steel

– Dry run protection

– Door safety switch

– Connections for plate phase separators (oil separators)

– Inner basket width 1180 mm

– Usable height of basket to lower edge of nozzle block 675 mm

– Flat jet nozzles

– Washing pressure 4 bar

– Return bend as a condenser for low water consumption

– including 20 KG LCT Power Star 50-730

– 24 month guarantee

Price: €18.528.00 The price includes 19% VAT

 Standard: Without insulation as standard

Fully automatic small parts washing system for single-stage cleaning and degreasing

– Machine and washing pump made entirely of stainless steel

– Automatic lid opening 80° via pneumatic control

– Operating pressure 4 bar

– Digital temperature control

– Automatic basket drive

– Touch button for turning the basket outside of the cleaning procedure

– Tank cover and sieve filter under the basket made of stainless steel

– Dry run protection

– Door safety switch

– Connections for plate phase separators

– Fan nozzles

– Basket diameter 1500 mm

– Basket payload 350 KG

– Usable height between basket and nozzle holder 750 mm

– Tank capacity 600 liters

Incl. 20 KG LCT Power Star 50-730 for all applications

– 24 month guarantee

Price: €30.356.00 The price includes 19% VAT